For Wax Removal: Mix one (1) part of Arroworks Non-Ammoniated Wax Stripper to ten (10) parts water. Mop floor freely with solution. Allow a dwell time of 5 to 10 minutes or until wax has been dissolved. Pick up dissolved wax from floor with mop or wet vacuum. Rinse floor thoroughly with clear water.
It is recommended that a scrubbing machine with No. 1 or No. 2 steel wool pad be used for stubborn stains. For heavy wax buildup, increase the Non Ammoniated Wax Stripper dilution to one (1) part stripper to five (5) parts water. Follow the same procedure as above. Stripping capacity depends on the thickness of the coating and the character of the coating. Additional applications may be required. After using ArroChem's Non-Ammoniated Wax Stripper, refinish floors with a quality self-polishing liquid wax or floor finish.
*As conditions vary, all dosages and guidelines are merely suggested starting points; it is recommended the user determine the proper operating conditions for his/her system.
Printer Friendly Version
